Samsung MAGNETRON DE6612-D, Руководство по обслуживанию

Страница: 5 / 30

2. Microwave Oven Installation Requirements
- 4 -
Requirements
The requirements for proper microwave oven operation
are as follows:
Operating Voltage: 24V
Breaking Voltage: Min. 21.5V, Max. 29.5V
Battery life must be at least 45Ah at 24V
If possible, connect the oven to a separate supply battery (a
secondary battery).
Supplied Items
Microwave oven, Turntable, Terminal Post Cover(Rubber
cover), Install bracket(Left/Right), 6-#5 Tap screws, 7-#4
screws and Owner’s Manual. The battery connection power
cable and safety fuse is not included.
Items needed for Installation
B
efore installing the appliance, make sure you have the
following items:
6-#5 Tap screws (The length of the screw is
subject to the installation requirements. Refer to
page 6)
7-#4 Tap screws (outer panel screws).
2 connection power cables : one red, one
black (refer to the page 8 for the length and size
of the connection cables)
Power cable terminal, power cable binder, and
lectrical tape. Depending on the installation location, the
following tools may be required.
Stick ruler, chalk, hammer, and gimlet.
Drill and borer
Ring/Fork type spanner set
Crimp pincers, soldering iron
Screw driver
Installation
Installation Location Tips
Before installing the oven, be sure to
comply with the following:
The installation location for the oven should be
even, flat, and sturdy.
Do not allow humidity or heat to affect
the oven.
Allow free space of about 50mm(2 inches)
around the oven for ventilation (Fig.1).
Microwave oven
(Fig.1)