Control Panel (TUMBLE DRY)
06 Temp.
Press Temp. to change the temperature of the current cycle.
Very: For sturdy cottons or those labeled Tumble Dry.
More: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium.
Normal: For heat lower than Medium. Use to dry synthetic or washable knit fabrics.
Less: For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Damp: Provides the lowest heated drying temperature possible.
07 Time
Press Time to select a drying time for the selected cycle. This is available only with TIME DRY, AIR FLUFF, and WRINKLE AWAY.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
08 Wrinkle
Prevent
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce
wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the Wrinkle Prevent cycle.
09 Eco Dry
This function is available with Normal and Time Dry. With the Eco Dry activated, drying takes a longer time but power
consumption is reduced. The drying time can be extended by up to 3 times normally depending on the temperature and load.
The Eco Dry function is enabled by default.
10 Mixed Load
Bell
The Mixed Load Bell notifies you when the average dry level in a load is damp dry (80 % dried). This lets you take items that
you don’t want fully dried or that dry quickly out of the dryer early
while letting others continue to dry. You can select this option in all Sensor Dry cycle except for
ACTIVE WEAR, and STEAM SANITIZE. Available dry levels are Normal, More, and Very.
11 Anti Static
Anti Static reduces static electricity that occurs from clothing friction. This is done by spraying steam into the drum in a later
stage of the drying cycle.
NOTE
The Anti Static function is only available with NORMAL, HEAVY DUTY, PERM PRESS, DELICATES, and TIME DRY.
12 Adjust Time
You can change the set time for the selected cycle. This is available only with TIME DRY, AIR FLUFF, and WRINKLE AWAY. To
change the cycle time, press Adjust Time or Adjust Time until the desired time is displayed.
13 Smart
Control
After you have inserted the Smart Home Adapter and connected the lower dryer to your home network using the Samsung
Smart Home app, you can control the dryer remotely. To begin, press
and hold Smart Control for 3 seconds. The Smart Control indicator blinks and the front door locks. The dryer enters waiting
mode for remote commands. For more information, visit the Samsung Smart Home website.
4. Instruction of Function
“
This document can not be used without Samsung's authorization”
25
