Control Panel (DELICATE DRY)
4. Instruction of Function
Medium: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry
Medium.
Med Low: For heat lower than Medium. Use to dry synthetic or washable knit fabrics.
Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low: Provides the lowest heated drying temperature possible.
07 Time
Press Time to select a drying time for the selected cycle. This is available only with TIME DRY, AIR
FLUFF, and WRINKLE AWAY. This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
08 Wrinkle Prevent
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in unheated air at
the end of the cycle to reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the Wrinkle Prevent cycle.
09 Eco Dry
This function is available with NORMAL and TIME DRY. With the Eco Dry activated, drying takes a
longer time but power consumption is reduced. The drying time can be extended by up to 3 times
normal depending on the temperature and load. The Eco Dry function is enabled by default.
10 Mixed Load Bell
The Mixed Load Bell notifies you when the average dry level in a load is damp dry (80 % dried). Th
is lets you take items that you don’t want fully dried or that dry quickly out of the dryer early
while letting others continue to dry. You can select this option in all Sensor Dry cycles except for
ACTIVE WEAR, and STEAM SANITIZE. Available dry levels are Normal, More, and Very.
11 Anti Static
Anti Static reduces static electricity that occurs from clothing friction. This is done by spraying
steam into the drum in a later stage of the drying cycle.
12 Adjust Time
You can change the set time for the selected cycle. This is available only with TIME DRY, AIR
FLUFF, and WRINKLE AWAY. To change the cycle time, press Adjust Time or Adjust Time
until the desired time is displayed.
13 Smart Control
Elec,) / Smart
Monitor (Gas)
After connecting the Tumble Dryer to your home network using the Samsung Smart Home app,
you can control or monitor the dryer remotely. When started, the Smart Control (Smart Monitor)
indicator blinks and the door locks. The dryer enters waiting mode and waits for remote
commands.
“
This document can not be used without Samsung's authorization”
28
