English-8
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
1.
Use the number buttons to directly select the channel that will be added or deleted.
2.
Press the
MENU
button to display the menu.
Press the
or
button to select “Channel”, then press the
ENTER
button.
3.
Press the
or
button to select “Add/Delete”.
Press the
ENTER
button.
4.
Repeatedly pressing the
ENTER
button will alternate between add channel and delete channel.
5.
Press the
CH
or
CH
button to switch to the appropriate channel, then repeat above.
6.
Press the
EXIT
button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote control.
Use the number buttons to directly select the channel that will be added or erased.
Press the
ADD/DEL
button on the remote control.
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1.
Use the number buttons to directly select the channel that you want to fine tune.
2.
Press the
MENU
button to display the menu.
Press the
or
button to select “Channel”, then press the
ENTER
button.
3.
Press the
or
button to select “Fine Tune”, then press the
ENTER
button.
4.
Press the
or
button to adjust the fine tuning.
5.
To store the fine tuning setting in the TV’s memory, press the
ENTER
button.
6.
Press the
EXIT
button to exit.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
Fine tuned channels that have been saved are marked with an asterisk “ * ”
on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select “Reset” by pressing the
or
button and then press the
ENTER
button.
Storing Channels Automatically
The TV automatically cycles through all of the available channels and stores them in memory.
This takes about one to two minutes.
1.
To select the signal source, follow the “Selecting the Video Signal-source” instructions number 1 to 3
on Page 7.
2.
Press the
or
button to select “Auto Program”. Press the
ENTER
button.
3.
Press the
ENTER
button. The TV will begin memorizing all of the available channels.
Press the
ENTER
button at any time to interrupt the memorization process and return to the “Channel” menu.
4.
After all the available channels are stored, the “Channel” menu reappears.
5.
Press the
EXIT
button to exit.
Press the
AUTO PROG.
button on the remote control.
BN68-00940H-00Eng.qxd 10/31/05 1:30 PM Page 8
