2-9
Installing TCP/IP Protocol on Macintosh PC
This installation is an example of a Macintosh running on System 8.5.
Installation method of TCP/IP protocol may vary depending on the different
operating system and/or a network interface card used and/or the Cable
Service Provider, but the overall process is generally similar. Contact the
Cable Service Provider to install TCP/IP protocol accuately.
1. Click the Apple icon and select the
TCP/IP
icon in the Control Panels.
2. In <TCP/IP> window, there are two menus, AppleTalk and Ethernet, in the
Connect Via
list. Select
Ethernet
in the list.
3. The Setup box is changed. There are 4 menus in the
Configure
list. Select
Using DHCP Server
in the list. Clicking this menu brings the IP address, router
address to be set automatically by InfoRanger.
4. Close the window to finish the TCP/IP installation. When <Save changes to
the current configuration?> message appears, click
[Save].
5. If a message appears to restart the system, reboot the system. Otherwise you
do not need to.
Содержание InfoRanger SCM-140U
