30
SETTING INDIVIDUAL FORWARD NO
ANSWER TIMERS
Each station can have an individual Call Forward No Answer timer to accom-
modate station users with different individual work habits. When adjusting
this timer, take care that the value is not greater than the transfer recall timer.
The range is 001-255 seconds.
PROGRAM KEYS
KEYPAD
- Used to set timer values.
UP
&
DOWN
- Used to select extension number.
Speaker
- Save data and advance to next program.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Press
TRSF
and then dial
502
[201] NO ANS FWD
Display shows
010 SEC
2. Dial the station number (e.g.,
205
) OR
[205] NO ANS FWD
press
UP
or
DOWN
key to select the
010 SEC
station and press the right soft key OR
OR
press
Redial
to select all stations
[ALL] NO ANS FWD
and press the right soft key
010 SEC
3. Enter the new value via the dial pad,
[205] NO ANS FWD
(e.g.
020
), must be 3 digits) and the
010 SEC
→
020
system will return to step 2
4. Press
Transfer
to store and exit
programming OR press
Speaker
to store
and advance to the next program
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 35
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a
CID number received from the Central Office with a name programmed in
this translation table. If there is no match between a received number and a
name in this table, [no CID name] will be displayed. The translation table
consists of 200 entries with each entry comprised of a 12 digit telephone
number and a 16 digit name. See
Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP
&
DOWN -
Used to scroll through options.
KEYPAD -
Used to enter selections.
SOFT KEYS -
Move cursor left and right.
SPK -
Used to store data and advance to next MMC.
Hold -
Used to clear previous entry.
ACTION
DISPLAY
1.
Press
Transfer
and then dial
728
CID XLAT:(001)
Display shows first entry
DIGIT:
2.
Dial entry number (e.g.,
005
)
CID XLAT:(005)
OR use
UP
and
DOWN
to scroll
DIGIT:_
through entries and press right
soft key to select entry
3.
Enter telephone number and press
CID XLAT:(005)
right soft key to advance to name entry
DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4.
Enter the name using the method
CID XLAT:(005)
in
Program Station Names
SAMSUNG TELECOM
and press right or left soft key to
return to step 2 above
OR press
Speaker
to save and advance
to next MMC OR press
Transfer
to
save and exit programming
DEFAULT DATA: NONE
31
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 36
