Samsung HW-N950, Полное руководство

Страница: 16 / 175

ENG - 12
The initial connection
1. Press the PAIR button on the remote control to enter the “ BT PAIRING ” mode.
(OR)
a. Press the (Source) button on the top panel and then select “ BT ”.
“ BT ” changes to “ BT READY ” in a few seconds automatically if there is no Bluetooth device
connected to the Soundbar.
b. When “ BT READY ” appears, press and hold the (Source) button on the top panel of the
Soundbar for more than 5 seconds to display “ BT PAIRING ”.
2. Select Bluet ooth mode on the TV. (For more information, see the TV’s manual.)
3. Select “ [AV] Samsung Soundbar Nxxx ” from the list on the TV’s screen.
An available Soundbar is indicated with “ Need Pairing ” or “ Paired ” in the TV Bluetooth device list.
To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [ TV Name ] → “ BT ” appears on the Soundbar’s front display.
4. You can now hear TV sound from the Soundbar.
If the device fails to connect
• If a previously connected Soundbar (e.g. “ [AV] Samsung Soundbar Nxxx ”) appears in the list, delete
it.
• Then repeat steps 1 through 3.
Disconnecting the Soundbar from the TV
Press the (Source) button on the top panel or on the remote control and switch to any mode but
“ BT ”.
• Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the
p
(Play/Pause) button on the remote control for 5 seconds with the Soundbar in “ BT READY ” status.
(Toggle On → Off)
NOTE
• After you have connected the Soundbar to your TV the first time, use the “ BT READY ” mode to
reconnect.
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Soundbar.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button
on the remote control or press and hold the (Source) button on the top of the Soundbar for
more than 5 seconds while the Soundbar is in “ BT ” mode.)