ENG - 8
Manually connecting the Subwoofer or Surround Speakers if automatic connection
fails
Before performing the manual connection procedure below:
•
Check whether the power cords for the Soundbar and subwoofer or Surround Speakers are
connected properly.
•
Make sure that the Soundbar is turned on.
1.
Press and hold
ID SET
on the rear of the subwoofer and surround speakers for at least 5 seconds.
•
The red indicator at the rear of each speaker turns off and the blue indicator blinks.
2.
Press and hold the
Up
button on the remote control for at least 5 seconds.
•
The
ID SET
message appears on the display of the Soundbar for a moment, and then it
disappears.
•
The Soundbar will automatically power on when
ID SET
is complete.
3.
Check if the LINK LED is solid blue (connection complete).
Содержание HW-N950
