Samsung HW-C900-XAA Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 70

background image

2

Safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.

This symbol indicates important instructions
accompanying the product.

WARNING

To reduce the risk of ﬁ re or electric shock, do not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the ﬂ oor/wall in accordance with the installation instructions.

CAUTION

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the
apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.

This product satisﬁ es FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent
electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution : FCC regulations state that any unauthorized changes or modiﬁ cations to this equipment may void the user's authority to operate it.

•
•

•

•

•
•
•
•

- HW-C900-XAA_0831.indd 2

- HW-C900-XAA_0831.indd 2

2010-08-31 6:21:33

2010-08-31 6:21:33

«
1
2
3
4
...
»

Содержание HW-C900-XAA







































































Отзывы:

Нет отзывов

Похожие инструкции для HW-C900-XAA

Бренд: Galaxy Страницы: 12

Бренд: Galaxy Страницы: 11

Sky Champion S-20R

Бренд: Hallicrafters Страницы: 5

Бренд: Icom Страницы: 24

Бренд: Icom Страницы: 2

Бренд: Javad Страницы: 16

Бренд: Jensen Страницы: 11

Бренд: Jensen Страницы: 24

Бренд: Jensen Страницы: 22

MP6211 - Radio / CD

Бренд: Jensen Страницы: 52

Бренд: Jensen Страницы: 2

Бренд: Jensen Страницы: 16

Бренд: Jensen Страницы: 3

Бренд: Jensen Страницы: 9

Heavy Duty JHD40BT

Бренд: Jensen Страницы: 2

Бренд: Samsung Страницы: 94

Бренд: Icom Страницы: 2

Бренд: KYL Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды