Samsung HT-TWQ22, Инструкция по эксплуатации

Страница: 32 / 39

GB
62
To tune in to a preset station, press on the
remote control to select a channel.
•
Refer to Step 2 on page 61 to
automatically or manually tune in
to a station.
2 1
•
“PRGM” flashes in the display.
3
Example: Presetting FM 89.1 in the memory
Press
TUNING/CH
to select "89.10".
Press the TUNER
button and select the
FM band.
•
Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
•
‘PRGM’ disappears from the display and
the station is stored in memory.
5 4
•
You can select between 1 and
15 presels.
Press the
TUNER
MEMORY
button.
Press the
TUNER
MEMORY
button
again.
6
To preset another
station, repeat steps
2 to 5.
Press
to select preset
number.
RADIO OPERA
TION
Presetting Stations
61
2 1
Tune in to the
desired station.
Press the
TUNER
button and select
the FM band.
Automatic Tuning 2
Manual Tuning
2 1
Select a broadcast
station.
Press the STOP ( )
button to select PRE-
SET and then press
button to select the preset station.
Automatic Tuning 1
Press the
FUNC-
TION
button to select
the FM band.
Press the
STOP
( ) but-
ton to select "MANUAL"
and then press and hold but-
ton to automatically search the band.
Automatic Tuning 2
Press STOP ( ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press
TUNING/CH
to
increase or decrease the
frequency incrementally.
Automatic Tuning 1
Remote Control Unit
Main Unit
Listening to Radio
•
This unit does not receive
AM broadcasts.
Note
HT-WQ20(41~70) GB 2003.4.11 5:54 PM Page 60