|
42
English
Appendix
Symptom
Check/Remedy
The aspect ratio cannot be
changed.
•
You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.
• The product is not
working.
•
Press and hold the remote control's
5
button for 5 seconds in
NO DISC
mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
You have forgotten the
rating level password.
•
With no disc in the product, press and hold the product's
5
button for longer than 5
seconds.
INIT
appears on the display and all settings will return to the default values.
Then, press the
POWER
button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
•
Is the antenna connected properly?
•
If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
•
If the
OPEN/CLOSE
^
button is pressed while listening to TV audio using the D. IN or
AUX functions, the
Blu-ray/DVD disc
functions are turned on and the TV audio is muted.
"Not Available" appears on
screen.
•
The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a
resolution your TV cannot
support (for example, 1080p),
you may not see a picture on
your TV.
•
Press and hold the
5
button on front panel for more than 5 seconds with no disc
inserted. All settings will revert to the factory settings.
No HDMI output.
•
Check the connection between the TV and the HDMI jack of the product.
•
Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
screen.
•
If random noise appears on the screen, it means that TV does not support HDCP (High-
bandwidth Digital Content Protection).
HT-EM35_ZA_0227.indd 42
HT-EM35_ZA_0227.indd 42
2012-02-27 오전 10:55:23
2012-02-27 오전 10:55:23
