English
31
04
Basic Functions
DSP (Digital Signal Processor)/EQ
DSP (Digital Signal Processor) : DSP modes have
been designed to simulate different acoustic
environments.
EQ : You can select POPS, JAZZ , ROCK, or USER
to optimize the sound for the genre of music you are
playing.
Press the
DSP/EQ
button.
POPS,
JAZZ,
ROCK
Select POP, JAZZ, or ROCK,
depending on the genre of music
you're listening to.
USER
You can enjoy music as you set in
“EQ:USER ”.
If you press ENTER in the “EQ:USER”
menu, you will see a window where you
can change the EQ settings to your
preference.
STUDIO
Provides a sense of presence as if in a
studio.
CLUB
Simulates the sound of a dance club
with a throbbing bass beat.
HALL
Provides a clear vocal as if listening in a
concert hall.
MOVIE
Provides the feeling of a movie cinema.
CHURCH
Provides the feeling of being in a
grand church.
OFF
Select this for normal listening.
NOTE
The DSP/EQ function is only available in Stereo
mode.
The DSP/EQ function is not available while
playing AC3 signal in 2.1 channel mode.
•
•
✎
DSP /EQ
Listening to Radio
Using buttons on the Remote Control
Press the
FUNCTION
button to select
FM
.
Tune in to the desired station.
Preset Tuning 1
: You must fi rst add a desired
frequency as a preset. Press the
STOP
(
) button
to select
PRESET
and then press the
TUNING/
CH
(
) button to select the preset station.
Manual Tuning
: Press the
STOP
(
) button to
select
MANUAL
and then press the
TUNING/CH
(
) button to tune in to a lower or higher
frequency.
Automatic Tuning
: Press the
STOP
(
) button
to select
MANUAL
and then press and hold the
TUNING/CH
(
) button to automatically search
the band.
Setting Mono/Stereo
Press the
MO/ST
button.
Each time the button is pressed, the
sound switches between
STEREO
and
MONO
.
In a poor reception area, select
MONO
for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
Press the
FUNCTION
button to select
FM
.
Press the
TUNING/CH
(
) button to select
<89.10>.
Press the
TUNER MEMORY
button.
Number fl ashes on the display.
Press the
TUNING/CH
(
) buttons
to select preset number.
You can select between 1 and 15 presets.
Press the
TUNER MEMORY
button again.
Press the
TUNER MEMORY
button before
number disappears from the display.
Number disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 5.
1.
2.
•
•
•
•
•
1.
2.
3.
•
4.
•
5.
•
•
6.
HT-D423H-XU-ENG-1228.indd 31
HT-D423H-XU-ENG-1228.indd 31
2011-12-28 4:18:20
2011-12-28 4:18:20
