16
English
Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
1.
2.
3.
Black
Red
Fit the speaker in a height adjusting hole of your choice.
For the height information, check the following examples.
(570mm for the default height)
Ex)
Hole 1: 650mm in the speaker height
Hole 2: 635mm in the speaker height
Close the cover as shown and tighten back the 3
screws.
This is after the height of the speaker is adjusted.
You can repeat these steps above at any time if you
want to readjust the height.
3.
4.
5.
3
4
5
Hole 1
Hole 2
Front Speaker (R)
Subwoofer
Front Speaker (L)
HT-D423H-XU-ENG-1228.indd 16
HT-D423H-XU-ENG-1228.indd 16
2011-12-28 4:17:52
2011-12-28 4:17:52