Operating your VCR (DVD) with the Remote Control
•
The remote control may not work on some brands of VCR (DVD)s.
Also, some operations may not be possible depending on your brand of VCR (DVD).
•
The remote control will work with Samsung VCRs (DVDs) by default.
1
Press MODE button to make VCR indicator
on the remote control flash.
2
3
Point the remote control toward the VCR
(DVD).
4
While holding down POWER( ) button,
enter the code corresponding to your brand
of VCR (DVD).
•
If the code matches the VCR (DVD)'s code, the VCR (DVD) will
be turned off.
•
If there is more than one code listed for your VCR (DVD) in the
table, enter one at a time to determine which code works.
•
If you want to operate your DVD player, press the Device Select
button until the DVD indicator on the remote control flashes.
•
You can use VCR (DVD) POWER, VOLUME, PLAY, PAUSE,
STOP, SKIP and Numeric button (0~9).
5
If VCR (DVD) is turned on or off when you
press the power button of the remote
controller, the setting is completed.
47
Press POWER( ) button to turn on the
VCR (DVD).
HT-AS601B SEA 2005.4.15 9:33 AM Page 50