background image

READ INSTRUCTIONS
All the safety and operating instructions should be
read before the appliance is operated.

RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.

HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.

FOLLOW INSTRUCTIONS
All operating and use instructions should be 
followed.
WATER AND MOISTURE
Do not use this video product near water-
for example, near a bathtub, wash bowl,  
kitchen sink, or laundry tub, in a wet basement, 
or near a swimming pool, and the like.

OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire 
or electric shock.

VENTILATION
Slots and openings in the cabinet are provided 
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked 
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product 
should never be placed near or over a radiator or
heat register.
This video product should not be placed 
in a built-in installation such as a bookcase 
or rack unless proper ventilation is provided 
or the manufacturer's instructions have been
followed.

POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.

CLEANING
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners 
or aerosol cleaners. Use a damp cloth for cleaning.

LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when 
it is left unattended and unused for long 
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. 
This will prevent damage to the video product 
due to lightning and power-line surges.

OBJECT AND LIQUID ENTRY
Never push objects of any kind into this 
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.

ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table. 
The video product may fall, causing serious injury to
a child or adult, and serious damage 
to the appliance.
Use only with a cart, stand, tripod, bracket, 
or table recommended by the manufacturer, 
or sold with the video product. Any mounting 
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.

CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.

POWER SOURCES
This video product should be operated only from the
type of power source indicated 
on the marking label. If you are not sure 
of the type of supply to your home, consult your
appliance dealer or local power company. 
For video products intended to be operated from
battery power, or other sources, refer 
to the operating instructions.

Safety Instructions

3

 HT-AS601B SEA  2005.4.15  9:33 AM  Page 6

Содержание HT-AS601
























































Отзывы: