Press SETUP button.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press INPUT button one time.
•
“SPEAKER SETUP” appears in the display.
Press SURROUND button to select the speaker you want.
•
Each time you press this button, F.SPK
➝
C.SPK
➝
S.SPK
➝
SB SPK
➝
SW SPK
➝
CROVR will be selected in turn.
Press SELECT ( ) button to set the speaker mode.
To Exit Setup Mode
•
Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
• LARGE : Select when you use large speaker.
You can listen to full range sound.
• SMALL : Select this when you use small speaker.
Bass below 100Hz will not be output.
• NONE : Select this when you use no speaker.
• YES(Subwoofer) : Select this when you use Subwoofer Speaker.
• NO(Subwoofer) : Select when you do not use Subwoofer Speaker.
• CROVR: Select the crossover frequency for the best bass response in
your room.
20
• F.SPK (Front) : LARGE, SMALL
• C.SPK (Center) : LARGE, SMALL, NONE
• S.SPK (Surround) : LARGE, SMALL, NONE
• SB SPK (Surround Back) : LARGE, SMALL, NONE
• SW SPK (Subwoofer) : YES, NO
• CROVR (Crossover Frequency): 60, 80, 100, 120, 150, 180, 200Hz
CROVR(Crossover Frequency) for this unit is 150Hz.
Setting the Speaker
MAIN UNIT
1
2
4
3
,
OPERA
TION
HT-AS601B SEA 2005.4.15 9:33 AM Page 23