Alignment and Adjustments
Samsung Electronics
2-1
Factory
DDP1011(L5)
DNIe
ADV7402(M)
ADV7402(S)
uPD64083
MSP4440
CCA
Cinema CCA
SP Actuator
CHECKSUM 0000
OPTION
SERVICE
T_RoboAUS0_XXXX
20XX_XX_XX
T-DTVUCOM5-XXXX
T-RoboAUS1_XXXX
2-1 When Entering Service Mode:
2-1-1 Service Mode Entry Method
1. Turn off the power to make the SET STAND-BY mode.
2. In order to enter the Service Mode, Press "Mute"
→
"1”
→
"8"
→
"2"
→
"POWER" button on the Remote Control.
In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
2-1-2 Initial DISPLAY State in times of SERVICE MODE Switch overs
2-1-2(A) OSD DISPLAY
2-1-2(B) BUTTONS OPERATIONS WITHIN SERVICE MODE
2. Alignment and Adjustments
MENU
Full Menu Display / Move to Parent Menu
Direction keys
▲
/
▼
Item Selection by Moving the Cursor
Direction keys
◀
/
▶
Data Increase/Decrease for the Selected Item
Source
Cycles through the active input source that are connected to the unit
Содержание HL-R5677W - 56" Rear Projection TV
Страница 4: ...1 2 Samsung Electronics MEMO ...
Страница 34: ...2 30 Samsung Electronics MEMO ...