75
English
Cautions for Hospitality mode options
– Hospitality Mode: should be Standalone. – Interactive mode cannot support SIRCH.
– Power On Source must be set to TV. If you select other external sources, SIRCH cannot support an upgrade.
– If you try to upgrade SIRCH in external source (PC/HDMI…), SIRCH could not support upgrade by manual
SIRCH / SIRCH Update Time.
– SIRCH Upgrade Time: not off.
– Dynamic SI should be set to ‘Off’ to modify the DTV display channel map in channel map tap.
Which all TV broadcasting standards are supported by the SIRCH application?
SIRCH application supports only ATSC and DVB .
How to add channels for DVB /ATSC?
The user needs to select a particular TV region and model number. On basis of these parameters, the application
adds channels for DVB (for EU) or ATSC (for US). Please refer section 2.7.
What all broadcasting type SIRCH Modulator supports?
The SIRCH modulator supports only DVB-C (for DVB) and OpenCable (for ATSC) standards for broadcasting.
What is difference between Channel in the channel map and Channel configured in SIRCH modulator?
– Channels in the Channel Map are used watch channels on TV. We can add more than one channel in the
channel map. This is in form of clone data and transfered using the seed stream. On other hand Channels
conigured in the SIRCH modulator are used for broadcast data (clone or binary) from the modulator with ixed
frequency or channel numbers. This same channel number is used on the TV named the SIRCH channel for
software update. (Please refer Appendix A).
[HG690_EURO]Install_Guide-00ENG.indd 75
2013-03-21
4:37:05
