70
English
Launching Ventus application
Go to File Menu
Utility
Generate and click GO for Launch Ventus
Upgrading the clone or binary file on TV
To upgrade the clone for binary ile on the TV, use a prepared merged stream (Binary_outputstream.mpg or clone_
outputstream.mpg).
1.
Locate the stream ile in the Modulator utility ( as explained in 2.11).
2.
Set the set channel to broadcast the stream by clicking on Frequency Table.
3.
Select Opencable for ATSC or DVB-C for DVB models.
4.
Click Play to broadcast the stream.
5.
In TV’s factory menu, the
SIRCH
channel must be same as the channel on which stream is broadcasting.
6.
The SIRCH version must be earlier than the software version set before generating the stream ile.
7.
Click on Manual
SIRCH
. Please check taht the channel setup is set to Cable, not Air, if the cable is connected
to TV for broadcasting.
Updating the application with new Model
To update the application with a new model, to conigure the clone iles for that model, users must possess a model
installation XML ile. To update a new mode, follow these steps:
1.
Go to File Menu
Update New Model.
2.
A window (Add/Update Model) opens and asks users to enter
the Coniguration ile (Model installation xml ile). Click the
Browse button to locate the model installation xml ile.
3.
After selecting the installation ile, the window shows the model
name, series, region and TV model name in extboxes.
4.
To add model click the Add button. If a model already exists,
application will update the model orl add the model in the
model dropdown box.
5.
To close the window click Close button.
[HG690_EURO]Install_Guide-00ENG.indd 70
2013-03-21
4:37:04
