61
English
¦
GENERAL INFORMATION
System Overview
The ‘Samsung Interactive Remote Control for Hospitality (SIRCH)’ application is a Remote Control Update system
designed to provide better and more cost-effective service for Hospitality industries. This allows user/operators to
conigure the guest TV with RF distributing system. Using this helps the user to set and conigure the guest room TV
Set parameters. The created setting ile will get used by SRCUS for coniguration of guest TVs.
The Application is intended to create or modify clone iles for user and to update guest TV with these clone iles by
transmitting them via RF. Using this provides a user interface similar in appearance to the TV’s parameter settings
where user the can update factory menu settings and modify or tune channels to update guest TVs.
To effectively complete and support the requirements of the “Hospitality” Industry, a management system is needed
that will allow the operator to have control of the TV sets in the guest’s room without requiring a potentially disruptive
or costly visit to each room
–
Channel Configuration Made Easy All from the Head End FMA System.
–
Will configure and deliver the channel line-up and SW upgrade to the guest room terminals via the
hotel’s coaxial distribution.
This application is an S/W utility to conigure user coniguration parameter deined below:
– Hotel Factory Menu (Standalone Menu/Interactive Menu)
– Channel map
This also supports generation of a TS stream embedding clone ile information and control of the modulator used for
broadcast of the TS stream.
Purpose of the Document
This document is prepared to facilitate and guide the user in creating/modifying clone iles, to update interactive/
standalone menu settings, to conigure channel map and to create TS stream using SIRCH. Screens-wise
explanations are provided here for the process low.
[HG690_EURO]Install_Guide-00ENG.indd 61
2013-03-21
4:37:03
