2-32
2. Product specifications
2-4-2. Menu Items
To Enter this menu: Press the
MUTE → 1 → 1 → 9 → ENTER
E
buttons in order. (From the Hospitality mode, the
Standalone mode is set.)
To Exit from this menu : power off and turn on again.
NOTE
Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Description
Category
Item
Initial value
Hospitality
Mode
Hospitality
Mode
Standalone
Select Hospitality mode.
Interactive mode : TV works with an SI STB or SBB.
•
Standalone mode : TV works alone, without an SI STB or SBB.
•
SI Vendor
SI Vendor
OFF
Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic
•
/ Innvne / Quadriga / ETV / Ibahn / Magilink / Otrum / Siemens /
Amino / MDC / Enseo
Standalone mode : OFF / Movielink / Swisscom / Smoovie / SSCP
•
Power On
Power On
Channel
Last Saved
Set the default values that will be applied when the TV is turned on.
User Defined : Lets you set Power On Channel and Channel Type
•
manually. See Power On Channel and Channel Type below.
Last Saved : If you select this item, when the TV is turned on, it
•
displays the channel it was displaying when it was turned off.
Power On
Channel
Num
1
When the TV is turned on, it switches automatically to this channel.
Power On
Channel
Type
ATV
Select channel band : AIR (analogue air band), DTV (digital air band),
CATV
(analogue cable band), CDTV (digital cable band)
Power On
Volume
Last Saved
User Defined : Lets you set the Power On Volume manually. See
•
Power On Volume below.
Last Saved : When the TV is turned on, it returns to the volume that
•
had been set when the power had been turned off.
Power On
Volume
Num
10
The TV turns on with this Volume Level in Stand Alone Hospitality
mode.
Min
Volume
0
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max
Volume
100
The maximum Volume Level the user can set in Stand Alone Hospitality
mode.
Power On
Source
TV
Select the input source the TV displays when turns on.
Power On
Option
Last Option
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
Last Option : Returns to its last Power state. If it was in Stand-by, it
•
returns to Stand-by. If it was on, it turns on.
Power On : When the power returns, the TV turns on.
•
Standby : When the power returns, the TV enters the Standby
•
mode.
Channel
Channel
Setup
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tunning, Antenna
selection, etc.
