2-37
2. Product specifications
Hotel TV Function
Description
Category
Item
Initial value
REACH
Solution
Group ID
…
Select the Group ID of the REACH server. (Refer to the REACH server
manual for more details.)
Room
Number
…
et the Room Number.
REACH
Config
Version
…
The version of REACH is displayed.
Network
Network
Setup
Set an IP address to establish an Internet connection.
Soft AP: Using this function, you can connect the TV on your mobile
devices. Set the options for connection of Wi-Fi device.
Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your
•
mobile devices can find the TV name in Wi-Fi connection list.
Security key: Set a security key that you need to enter on other
•
devices so they can connect to the TV.
Input the generated security key into the device you want to
-
connect.
If network does not operate normally,check the security key
-
again. An incorrect security key may cause a malfunction.
Soft AP may not be available if it is not supported by the model.
•
Maximum number of devices that can be connected: 4 devices.
•
Bitrate : 10 Mbps/device.
•
The specifications above are based on our in-house testing. Actual
•
performance may vary depending on your wired/wireless network
environment.
SmartHub
Model
Setting
Set Smart Hub Model.
SmartHub
Setting
Set up Smart Hub.
Service
Discovery
On
If this option is set to On, you can share content with other devices,
such as smartphones, in DLNA mode.
Lan Out
OFF
Enable/disable LAN Out. When enabled, the TV can work as a wired
router for other network devices.
VLAN ID
...
Create separate VLAN groups. A 3-digit number can be entered
between 1 and 255 for the VLAN ID.
Solution
VLAN ID
...
When VLAN is used, set a VLAN ID to be assigned to a Solution (such
as SYNC,H.Browser etc.).
Device
VLAN ID
...
Set a VLAN ID to be assigned to external devices connected to the LAN
OUT port.
Widget
Solution
Widget
Mode
ON
Widget Mode On/Off.
Solution
Type
Vendor
Server
Select type of solution (Vender Server/ SINC Server).
Server
URL
Setting
Set server URL.
License
Server IP
Setting
…
Set server IP.
IPTV Mode
ON
IPTV mode On/Off.
