16
■ Take off the Pan support.
■ Clean these and the control handles with a damp cloth, washing up liquid and warm
water. For stubbon soiling, soak beforehand.
■ Dry everything with a clean soft cloth.
Cleaning and Maintenance
■ Cleaning operations must only be carried out when the appliance is cool.
■ The appliance should be disconnected from your mains supply before
commencing any cleaning process.
■ Clean the appliance regularly, preferably after each use.
■ Abrasive cleaners or sharp objects will damage the appliance surface;
you should clean it using water and a little washing up liquid.
Pan support, Control handles
■ Regularly wipe over the top plate using a soft cloth well wrung out in warm water to
which a little washing up liquid has been added.
■ Dry the top plate thoroughly after cleaning.
■ Thoroughly remove salty foods or liquids from the hob as soon as possible to avoid
the risk of corrosion.
■ Stainless steel parts of the appliance may become discoloured over time. This is
normal because of the high temperatures. Each time the appliance is used these
parts should be cleaned with a product that is suitable for stainless steel.
Top plate
Usable
Unusable
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Nylon Brush
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Metal Brush
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Edible Oil
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Acidic/Alkali
Detergent
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Abrasive
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Thinner/Benzene
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Soft cloth
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Neutral Detergent
17
■ Re-assemble the Auxiliary, Semi-Rapid, Rapid and
Triple-Crown burners as follows :
1. Place the flame spreader (17) on to the burner cup (18) so that the ignition device and the flame
supervision device extend through their respective holes in the flame spreader.
The flame spreader must click into place correctly.
2. Position the burner lid (16,16-1,16-2) onto the flame speader (17) so that the retaining pins fit
into their respective recesses.
■ Remove the burner lids and Flame Spreaders by pulling them upwards and away
from the top plate.
■ Soak them in hot water and a little detergent.
■ After cleaning and washing them, wipe and dry them carefully. Make sure that the
flame holes are clean and completely dry.
■ Wipe the fixed parts of the burner cup with a damp cloth and dry afterwards.
■ Gently wipe the Ignition device and flame supervision device with a well wrung-out
cloth and wipe dry with a clean cloth.
■ Before placing the burners back on the top plate, make sure that the injector is not
blocked.
BURNERS
Replace parts in the correct order after cleaning.
- Do not mix up the top and bottom.
- The locating pins must fit exactly into the notches.
Cleaning and Maintenance (Continued)
16-1
16-2
17
18
16
