12
Turn on
Preparation
1
The following symbols will appear on the control panel, next to each control handle :
Ignition & Adjustment
2
■ Place a pot or a pan on the corresponding cooking position.
■ Fully press down the control handle for the corresponding cooking position and turn it to the
left, to the ignition position, and hold it there for a few seconds at most until the burner ignites.
■ After igniting, keep the control handle pressed for about 5~8seconds more because the heat
sensor that opens the gas channel has to warm up first. Set control handle to the position you
want.
■ If the burner does not light, repeat the process.
■ The flame size can be set continuously between maximum and minimum by slowing turning the
control handle.
How to Use the Appliance
■ The minimum setting is at the end of the anti-clockwise rotation of the control handle.
■ All operation positions must be selected between the maximum and minimum position.
■ The symbol on the control panel, next to the control handle will indicate which burner it operates.
■ If the igniters are dirty, this makes the burner harder to light, so you
should keep them as clean as possible. Do this with a small brush and
make sure that the ignition device is not hit or knocked violently.
■ The flame supervision device shall not be operated for more than 15
seconds. If after 15 seconds the burner has not lit, stop operating the
device and open the compartment door and/or wait at least one minute
before attempting to reignite the burner.
Circle : gas off
Large flame : maximum setting
Small flame : minimum setting
Ignition position
13
Extinguishment
3
■ Turn the control handle to clockwise, to setting ‘O’ (off position)
■
Right after extinguishment, the appliance is still hot. Be careful not to
burn yourself.
■ This appliance is fitted with a flame supervision device which cuts off
the supply of gas to a burner if the flame goes out, for example if food
has boiled over, or if there is a sudden draught.
■ In the event of the burner flames being accidentally extinguished, turn
off the burner control and do not attemp to re-ignite the burner for at
least one minute.
Turn off
How to Use the Appliance (Continued)
