Samsung EHS AE050RXYDEG/EU Скачать руководство пользователя страница 48

Страница: 48 / 212

5. Unit installation

Installer reference guide / Mono tank integrated type

Moving the indoor unit

• Be sure that the moving route is safe by anticipating the weight of the indoor unit in advance.

Moving the Indoor unit with a forklift

• Insert the fork into the wooden pallet at the bottom of the indoor unit carefully. Be careful that the fork does not

damage the indoor unit.

• When moving the Indoor unit, be careful not to damage the indoor unit by impact. Do not remove the packaging until

the indoor unit reaches the final installation location.

• When adjusting the exact location of the Indoor unit, use the handles.

- A minimum of two people should lift the unit by the handles. (Do not grasp the pipe)

• Remove all handle brackets and the wooden pallet when the unit is in the final installation location.

Содержание EHS AE050RXYDEG/EU





















































































































































































































Результаты поиска

Содержание EHS AE050RXYDEG/EU

Отзывы:

Samsung EHS AE050RXYDEG/EU, Руководство пользователя, Страница: 48 / 212

Результаты поиска

Содержание EHS AE050RXYDEG/EU

Отзывы: