Installation
English
27
• Remove the terminal block cover plate. Insert the power cord with a UL-listed strain
relief through the hole provided in the cabinet near the terminal block.
• A strain relief must be used. Do not loosen the nuts already installed on the terminal
block. Be sure they are tight. Use a
3
/
8
” (1 cm) deep well socket.
STEP 4
Level the dryer
To ensure optimal performance, the dryer must be level.
A
B
1.
Using a
level (A)
, check if the dryer
is level side to side and then front to
back. If the dryer is not level, adjust the
leveling feet (B)
at the bottom of the
dryer. Then, check if the dryer is level
again.
A
B
NOTE
• To set the dryer to the same height
as your washer, fully
retract (A)
the leveling feet by turning them
counterclockwise, then
loosen (B)
the
feet by turning them clockwise. Once
the dryer is the same height as the
washer, follow the directions above
to level the dryer.
• Adjust the leveling feet only as much
as necessary to level the dryer.
Extending the leveling feet more
than necessary can cause the dryer
to vibrate.
DV3200T_DC68-03784N-00_EN.indd 27
2020-05-25 11:10:20
Содержание DVE45T3200 Series
Страница 1: ...Dryer User manual DVE G 45T3200 DV3200T_DC68 03784N 00_EN indd 1 2020 05 25 11 10 17 ...
Страница 57: ...Sèche linge Manuel d utilisation DVE G 45T3200 DV3200T_DC68 03784N 00_CFR indd 1 2020 05 25 11 29 05 ...
Страница 113: ...Secadora Manual del usuario DVE G 45T3200 DV3200T_DC68 03784N 00_MES indd 1 2020 05 25 11 10 48 ...