S
ystem Setup
English - 23
Setting the Date and Time
Your DVD Recorder & VCR contains a 24-hour clock and calendar
used to:
• Automatically stop a programme recording
• Preset your DVD Recorder & VCR to record a programme automatically
• You must set the date and time when you purchase the DVD Recorder
& VCR.
• Do not forget to reset the time when you change clocks from winter to
summer time and vice versa.
1
. With the unit in Stop mode/No Disc mode, press the
MENU
button.
2
. Press the
▲▼
buttons to select
Setup
, then press the
OK
or
►
button.
3
. Press the
▲▼
buttons to select
Clock Set
, then press the
OK
or
►
button.
4
. Press the
◄►
buttons to select the hour, minutes, day, month and year.
• The selected item is highlighted.
5
. Press the
▲▼
buttons to increase or decrease the value.
• The day of the week is displayed automatically.
• You can hold the
▲▼
buttons down to scroll more quickly through
the values.
6
. Press the
OK
button, then the date and time will be saved. If you don’t
press the
OK
button, it will not be saved.
7
. Press the
EXIT
button to exit the menu.
You do not need to preset the stations if you have already set them
automatically (See Plug & Auto Setup on page 22).
Your DVD Recorder & VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done by:
• Plug & Auto Setup (See page 22)
• Auto Setup
• Manual Setup (See page 24)
1
. With the unit in Stop mode/No Disc mode, press the
MENU
button.
2
. Press the
▲▼
buttons to select
Setup
, then press the
OK
or
►
button.
3
. Press the
▲▼
buttons to select
Install
, then press the
OK
or
►
button.
4
. Press the
▲▼
buttons to select
Auto Setup
, then press the
OK
or
►
button.
The message “Your data will be lost. Press [OK] to continue, [MENU] to exit.”
is displayed.
5
. Press the
OK
button to start the auto scanning.
• The
fi
rst frequency band is scanned and the station found
fi
rst is
displayed and stored.
The DVD Recorder & VCR then searches for the second station and so on.
• When the automatic scanning procedure has
fi
nished, the DVD
Recorder & VCR switches automatically to programme 1.
• The number of stations automatically stored by the DVD Recorder &
VCR depends on the number of stations that it has found.
6
. If you wish to cancel the auto scanning before the end, press the
OK
button.
• Once the auto scanning procedure has
fi
nished, some stations may
have been stored more than once; select the stations with the best
reception and delete the ones no longer required.
Auto Setup
Auto Channel Memory
Stop
50%
Clock Set
DVD-Recorder
No Disc
Programme
Setup
Date
Time
MON
JAN
01 2007 12
00
MOVE
OK
RETURN
EXIT
01293M-VR350,355-XEH-ENG.indb 23
01293M-VR350,355-XEH-ENG.indb 23
2007-03-12 오후 12:13:33
2007-03-12 오후 12:13:33
