14 -
English
C
onnections
C
onnecting &
S
etting Up
Quick Overview
A Quick overview presented in this guide will give you
enough information to start using the recorder.
Step 1 : Connecting the Antenna Cable
Step 2 : Connecting the Video Cable
Step 3 : Connecting the Audio Cable
Step 5 : Connecting External Devices
Step 6 : Connecting the Power Cord
Step 7 : Preparing the Remote Control
†
†
†
†
†
†
Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Step 1: Connecting the Antenna Cable . . . . . . . . . . . . . . . . .15
Step 2 : Connecting the Video Cable . . . . . . . . . . . . . . . . . .18
Step 3 : Connecting the Audio Cable . . . . . . . . . . . . . . . . . .21
Step 4 : Connecting HDMI/ DVI to a TV . . . . . . . . . . . . . . .24
Step 5 : Connecting External Devices . . . . . . . . . . . . . . . . . .26
Step 6 : Connecting the Power Cord . . . . . . . . . . . . . . . . . . .29
Step 7 : Preparing the Remote Control . . . . . . . . . . . . . . . . .29
•
Note to CATV system installer :
This reminder is
to call CATV system installer’s attention to Article 820-40
of the National Electrical Code (Section 54 of Canadian
Electrical Code, Part I), that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding
system of the building as close to the point of cable title
as practical.
Step 4 : Connecting HDMI/ DVI to a TV
00995G-VR345-XAA-Eng14-30 2006.4.10 2:50 PM Page 14