64
DVD-R3000
Advanced operations
Using the direct navigator
7
Use search functions such as fast-
forward and slow-motion to find the
end point of the part you want to erase
and press [ENTER].
8
Use the joystick [
▲
,
▼
] to select “Exit”
and press [ENTER].
9
Use the joystick [
œ
,
] to select
“Erase” and press [ENTER].
■
To stop partway through
Press [RETURN] or select “Cancel” and press [ENTER] in step 9.
■
To erase another part of the same program
Select “Next” after step 7 and press [ENTER], then repeat steps 9,
6 and 7.
For your reference
●
You can respecify the start or end points. The points you specify
last are used.
●
You cannot specify an end point before a start point or a start point
after an end point.
●
You may not be able to specify start and end points within
3 seconds of each other.
●
You cannot specify start and end points if you have recorded still
pictures on other equipment.
●
The unit pauses play when the end of the program is reached dur-
ing this procedure.
●
The disc’s available recording time may not increase after erasing
short parts of programs.
●
You cannot erase parts of protected programs.
●
Play lists created with the erased part are also erased.
rqt6035_p060-069.P65
02.2.26, 6:2 PM
64
