70_
recording
recording
USING THE SHOWVIEW FEATURE
SXCV
Before setting your HDD & DVD Recorder to record.
Switch on both the television and your HDD & DVD RECORDER.
Check that the date and time are correct.
Up to twelve programmes can be set to record.
With the unit in Stop mode, press the
TIMER
button.
Press the ▲▼ buttons to select
ShowView
, then press the
OK
or
► button.
A message is displayed to allow you to enter the ShowView
code.
Press the number buttons to enter the code of the programme that
you want to record in your television magazine.
If you want to correct the ShowView code that you are entering:
Press the ◄ button until the digit to be corrected is cleared.
Enter the correct digit.
Press the
OK
button.
The information concerning the programme is displayed.
When using the ShowView function for the fi rst time with stored
stations, the programme number fl ashes. This one time, you
must enter the PR number manually by pressing the ▲▼
buttons.
Press the
RED(A)
button if you do not want to use the default title
name.
The rename screen is displayed.
Follow steps 4 and 5 of “
Renaming (Labelling) a Title
” on pages
73~74.
If the programme and times are correct, press the
OK
button.
Turn the power off by pressing the
STANDBY/ON
button to
activate the timer recording setting.
Refer to pages 69 and 71 if you want to
Check whether the timer Recording has set correctly or not.
Cancel a preset recording.
The numbers next to each TV programme listing in the magazines or newspapers are ShowView code numbers,
which allow you to programme your HDD & DVD RECORDER. instantly with the remote control. Enter the ShowView
code for the programme you wish to record.
ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under
licence from Gemstar Development Corporation.
•
•
1.
2.
•
3.
•
-
-
4.
•
•
5.
6.
7.
•
-
-
M
HDD & DVD RECORDER
Timer Record
HDD
Library
Timer Record
Disc Manager
Setup
ShowView
Scheduled List
ShowView Extended : Off
Recorded List
|
|
|
|
m
MOVE
s
SELECT
r
RETURN
e
EXIT
HDD
Scheduled List
Current Time 10:54
<
MOVE
s
SELECT
r
RETURN
e
EXIT
Recorded List
No. To Source Date Start End Mode VPS/PDC
Recordable Time HDD 108:14 SP
Add a list
No. 01 No Title
Recordable Time HDD 108:14 SP
To Source Date
Start
End
Mode VPS/PDC
HDD
– –
JAN 01
10 : 54
12 :54
SP
On
Title
s
Save
HDD & DVD RECORDER
ShowView
HDD
Library
Timer Record
Disc Manager
Setup
Enter ShowView Code number. [0-9]
(Press [OK] button: Make Code.)
0~9
NUMBER
s
SELECT
r
RETURN
e
EXIT