
English
_31
SYSTEM SETUP
Press the ▲▼ buttons to select
Auto Setup
, then press the
OK
or ► button.
The message “Your data will be lost. Press [OK] to continue, [RETURN] to exit.” is displayed.
Press the
OK
button, then press the ▲▼◄► buttons to select your Country.
The HDD & DVD RECORDER searches for the stations according to a preset preference list
corresponding to the country that you have selected. (See page 28)
Press the
OK
button. Channel scan will be started.
The fi rst frequency band is scanned and the fi rst station found is displayed and stored. And the HDD &
DVD RECORDER searches for the second station and so on.
The number of stations automatically stored by the HDD & DVD RECORDER depends on the number
of stations that it has found.
Press the
OK
button to stop the Auto Setup
Manual Setup
You can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to
remove. You can programme the order of channels.
To setup, follow steps 1 to 3 in “Auto Setup“ on page 30.
Press the ▲▼ buttons to select
Manual Setup
, then press the
OK
or ► button.
Press the ▲▼ buttons to select a
PR
(programme) you wish to
edit, delete, or swap, then press the
COLOUR
button.
Select
Edit
,
Delete
or
Swap
.
In case of Edit (RED(A) button)
: You can add or edit PR
(programme) information. After change PR informations (
CH.
,
Name
,
Decoder
,
MFT
), select
Save
, then press the
OK
button.
-
CH
: Tune the channel using ◄► buttons.
-
Name
: Display station name automatically detected in
broadcasting signal. If not detected, you can edit name
by using ▲▼◄► buttons.
-
Decoder
: If you set on, you can record scrambled channels
using external decoder box.
Before setting on, refer to connecting external
decoder box in the page 22.
-
MFT (Manual Frequency Tunning)
: You can tune up the
channel frequency better using ◄► buttons.
In case of Delete (GREEN(B) button)
: the channel information of selected PR(programme) will be
removed.
In case of Swap (YELLOW(C) button)
: You can swap the channel information of two PR(programme).
For example, if you wish to swap PR2 and PR5, select swap at PR2, then press the
OK
button at PR5.
4.
5.
•
6.
•
•
M
4.
5.
•
•
•
Manual Setup
PR
CH
Name
Decoder
01
002
- - - -
Off
02
004
- - - -
Off
03
- - -
- - - -
- -
04
- - -
- - - -
- -
05
- - -
- - - -
- -
06
- - -
- - - -
- -
07
- - -
- - - -
- -
Edit
Delete
Swap
m
MOVE
s
SELECT
PR
01
CH
002
Name
- - - -
Decoder
Off
MFT
Save
Manual Setup