LAST MEMORY
33
34
DVD
PLAYBACK
How to Play a DVD
How to play DVD
Press your TV and Audio system POWER Buttons ON.
Depending on the disc, some DVD playback functions may not operate.
1
Press POWER Button and
OPEN/CLOSE Button.
•
Power turns on, the tray opens
and the STANDBY indicator light
goes out.
2
Load the DVD disc.
•
Load the disc label-side up.
3
Press PLAY/PAUSE
Button.
•
The tray closes and playback
begins.
To Pause Playback
Press PLAY/PAUSE Button.
•
To play again, press PLAY/PAUSE
Button once again.
To STOP Playback
Press STOP Button.
To Remove Disc
Press OPEN/CLOSE Button.
•
When play is stopped, the unit records the point where
STOP was pressed(RESUME function). Press PLAY again,
and play will resume from this point. When the tray is
opened or STOP is pressed again, the RESUME function
will be cleared.
•
If the unit is left in the STOP mode for more than one
minute without any user interaction, a screensaver will be
activated, and the TV screen will fade in and fade out
repeatedly. Press PLAY button to resume normal play.
•
If the unit is left for 30 minutes in pause during play or
menu, it will be stopped.
TV / AUDIO selection
Select Video mode by pressing
TV/VIDEO Button on the TV.
•
Video mode may be marked as
input.
Select Audio input CD, DVD or Aux on
your decoder/amp
•
Each audio amplifier is different.
Please refer to your audio amplifier
owner's manual.
LAST MEMORY
Note
DVD
LAST MEMOR
Y
1
3
DIMMER
STANDBY
OPEN/CLOSE
SKIP/SEARCH
POWER
927/SEA-33~46-U 4/1/8 6:59 PM Page 1