DCS-VIP User Guide
51
Authorization Code
Authorization Code
Authorization Code
Authorization Code
On the Authorization Code screen, you can set or reset the Authorization Code,
which you must enter when you change the service class. You can enter up to 10
authorization codes.
On the Entry choose
the entry number to select an Authorization Code or click the
Operation dropdown button to select the table entry number. At
the bottom of the
screen the Authorization Code and the Authorization Code enter blank will appear.
!
Account Code : Enter a 4-digit authorization code.
!
Author COS : Enter the service class that will be affected by the new
Authorization Code.
Select the Authorization Code and the COS for each entry. Click the Set button.
CID Translation
CID Translation
CID Translation
CID Translation
On the CID Translation screen, you can give a name to incoming external calls.
On the Entry
choose the table entry number to select the external telephone
number or click the Operation dropdown button to select the table entry number.
At the bottom of the screen the CID Number and the CID Name
parameters
will
appear.
!
CID Number : Enter the external telephone numbers, using 0~9, *, #. You can
enter up to 11 digits.
!
CID Name : Enter the name for the external telephone number. You are allowed
to use any characters up to a maximum of 15.
Select the CID Number and the CID Name for each entry. Click the Set button.
Internal Page Zone
Internal Page Zone
Internal Page Zone
Internal Page Zone
On the Internal Page Zone screen, you can select whether to include stations in
internal page zones or not. Each digital telephone can have more than one page
zone.
Click the Operation dropdown button to select the table entry number. Then
specify the following parameter’s value.
!
Member Tel No : Select the station number for internal page zone.
!
Page Zone : Set the page zones for the selected station number. (For instance,
you might tick Page zones 1 and 3 for station 201.) Tick on ‘*’ to include the
selected station in all page zones.
Select all the broadcasting zones for each member and click the Set button.
LCR Digit
LCR Digit
LCR Digit
LCR Digit
On the LCR Digit screen, you can set the LCR digit and the Route table. LCR (Least
Cost Routing) allows users to be automatically linked to the most inexpensive
network.
On the Entry click
the Route table entry number or click the Operation dropdown
button to select the entry number. At the bottom of the screen the following
parameters will appear.
