Samsung DCS-VIP, Руководство пользователя

Страница: 48 / 216

DCS-VIP User Guide
48
Group Features Setup
This section explains how to set up the group features. Select the GROUP PAGES
menu on the ADVANCE SETUP
➛ ➛ ➛ ➛
KEYPHONE menu screen. Then, you will see
GROUP PAGES screen consisting of following 20 submenus.
LCR Route Cos Contents StnGrp Lcr Time Operator
group
Pickup group Trunk group PGM Message Tone Cadence Wild Char
RingPlan Table Account Authorization
code Cid Translation Internal Page
Zone
LCR Digit LCR Modi
DIGIT
System Speed
Dial
Toll Allow Toll Deny
This section will describe how to setup functions for 20 submenus.
LCR Route LCR Route LCR Route LCR Route
On the LCR Route screen, you can set the time zone, the trunk group, and LCR
Modify Digit Table for LCR Route option. If a valid digit is dialed, the system selects
the trunk group according to the previously selected LCR Route table.
After clicking drop down button on the Route Table, select the table entry number.
Select time zone and class. Next, enter the following parameter values.
!
Trk Grp Tel : Enter the trunk group number.
!
Dgt Mod Table# : Enter the LCR Modify Digit Table number you want. The
contents for the selected LCR Modify Digit Table can be written in GROUP PAGES
➛ ➛ ➛ ➛
LCR Modi Digit menu.
Select all the parameters above for each time zone and click the Set button.
COS Contents
COS Contents COS Contents
COS Contents
On the COS Contents screen, you can select the functions for each service class.
Click the Entry No dropdown button to select the class of service and select the
Value parameter for each feature by ticking it. Select all the feasible features for
each class of service. Click the Set button.
StnGrp StnGrp StnGrp StnGrp
On the StnGrp screen, you can select the members for the station group and how
to distribute the calls.
First, click the Group Tel dropdown button to select the station group and select
the following parameter values. You don’t need to select the first station group
(number 500) since it is fixed as the operating group.
!
Group Name : Select the group name.
!
Ring Type : Set how to distribute the calls to the station group members
− Sequential : Start ringing the first member in in the group.
−
Distribute : Start ringing the members in turn, according to the preselected
order.
− Unconditional : Ring each member for the same number of times.
!
Overflow Time : Enter the time for transferring incoming calls to the station
previously specified by Next Dest, in case that all station group members are on
the line.
!
Transfer Recall Tm: Enter the recall time for transferring incoming calls to the
station previously specified by Next Dest.