SAMSUNG
DCS-816
Installation Manual
6-5
6.5 CTM - CTI Module (TAPI) (Figure 6-4)
The DCS Computer Telephony Module (CTM) is required to support CTI (TAPI) in the system.
The CTM has a DLI connection and a personal computer (PC) interface, which can be connected
to any DLI port of DCS-816. The system requires MDF connection for the CTM and modular jack
connection for a keyset. A PC may connect to the module via the DB9 connector. See Figure 2-3
and refer to section 2.5 (MDF Cabling).
Using one pair twisted wires, connect each CTM (via the modular jack marked
‘
DLI IN
’
) to the DLI
port of your choice via the Champ connector on the base board and then connect the CTM (via the
other modular jack marked
‘
KTS OUT
’
) to a keyset. A PC can be connected to the CTM via the
DB9 connector.
A special PC software package is required to run CTI (TAPI) and how to set up the software is de-
scribed in the other document in detail. Contact your dealer for information.
CONNECTING A CTM (TAPI)
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
FIGURE 6-4
CHAMP CONNECTION
PIN COLOUR
CIRCUITS / FUNCTIONS
39/14 BK-BR/ BR/BK T/R, 1
st
DLI port on base
40/15 BK-S/ S-BK
T/R, 2
nd
DLI port on base
41/16 Y-BL/ BL-Y
T/R, 3
rd
DLI port on base
42/17 Y-O/ O-Y
T/R, 4
th
DLI port on base
43/18 Y-GR/ GR-Y
T/R, 5
th
DLI port on base
44/19 Y-BR/ BR-Y
T/R, 6
th
DLI port on base
45/20 Y-S/ S-Y
T/R, 7
th
DLI port on base
46/21 VL-BL/BL-VL
T/R, 8
th
DLI port on base
47/22 VL-O/ O-VL
T/R, 9
th
DLI port on base
48/23 VL-GR/ GR-VL T/R, 10
th
DLI port on base
49/24 VL-BR/ BR-VL T/R, 11
th
DLI port on base
50/25 VL-S/ S-VL
T/R, 12
th
DLI port on base
CONNECT A CTM TO ANY DLI PORT
YOU CANNOT INSTALL THE EQUIPMENT OUTDOORS
SPECIAL PC SOFTWARE REQUIRED
C T
Ｍ
Ｐ Ｃ
C O M 1
C O M 2
T X D
2
2
3 ( R x D )
R X D
3
3
O R
2 ( T x D )
G N D
5
5
7 ( G N D )
9 P I N
2 5 P I N
P I N
A S S I G N M E N T
DLI
·
IN
RS-232-C(DB-9)
KTS
·
OUT
