SAMSUNG
DCS-816
Installation Manual
6-4
6.4 Door Phone and Door Lock Release (Figure 6-3)
The DCS Door Phone Interface Module (DPIM) is required in order to install a door phone or a
door lock release mechanism. The DPIM has a door phone interface and a door lock release cir-
cuit, which can be connected to any DLI port of DCS-816. The system requires MDF connection
for DPIM modules and modular jack connection for a door phone or a door lock release. DPIM
connections can be done through the Champ connector on the base board. See Figure 2-3 and
refer to section 2.5 (MDF Cabling).
Use one pair twisted wires, connect each DPIM module to the DLI port of your choice via the
Champ connector on the base board and connect a door phone or a door lock release to the
DPIM.
CONNECTING A DOOR PHONE AND LOCK RELEASE
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
FIGURE 6-3
CHAMP CONNECTION
PIN COLOUR
CIRCUITS / FUNCTIONS
39/14 BK-BR/ BR/BK T/R, 1
st
DLI port on base
40/15 BK-S/ S-BK
T/R, 2
nd
DLI port on base
41/16 Y-BL/ BL-Y
T/R, 3
rd
DLI port on base
42/17 Y-O/ O-Y
T/R, 4
th
DLI port on base
43/18 Y-GR/ GR-Y
T/R, 5
th
DLI port on base
44/19 Y-BR/ BR-Y
T/R, 6
th
DLI port on base
45/20 Y-S/ S-Y
T/R, 7
th
DLI port on base
46/21 VL-BL/BL-VL
T/R, 8
th
DLI port on base
47/22 VL-O/ O-VL
T/R, 9
th
DLI port on base
48/23 VL-GR/ GR-VL T/R, 10
th
DLI port on base
49/24 VL-BR/ BR-VL T/R, 11
th
DLI port on base
50/25 VL-S/ S-VL
T/R, 12
th
DLI port on base
CONNECT A DPIM TO ANY DLI PORT AFTER
CONNECTING A DOOR PHONE TO THE DPIM
NO EQUIPMENT CAN BE INSTALLED OUTDOORS
DOOR LOCK RELEASE RATE : 24VDC, 1A MAX
LOCK
DOOR BOX
LINE
Ｐ＋
Ｐ－
Ｌ１
Ｌ２
DOOR PHONE
RED
BLACK
GREEN
YELLOW
TWO PAIR
MODU LAR CABLE
WHITE
BLUE
THREE PAIR
MODULAR CABLE
TO CUSTOMER-PROVIDED
DOOR LOCK RELEASE
