Samsung DCS 400SI Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 83

background image

CONTENTS

4.2.5

MUTE MICROPHONE/HANDSET

Any keyset user can mute the keyset’s handset transmitter by pressing the MUTE
key. In addition, keyset users can also mute the keyset microphone while the keyset
is in speakerphone mode.

OFF-HOOK RINGING

When a keyset is in use, the system will provide an off-hook ring signal to indicate
that another call is waiting. The ring signal is a single ring repeated. The interval is
controlled by a system-wide timer. Single line stations will receive a tone burst
through the handset receiver instead of a ring.

OFF-HOOK VOICE ANNOUNCE (STANDARD)

Keysets may receive a voice announcement while on another call. The calling sta-
tion must have an OHVA key. When transferring a call to a busy keyset or while
listening to busy signal, the station user can press the OHVA key to make an OHVA
call to the busy keyset. If the called keyset is in the DND mode, it cannot receive
OHVA calls.

OFF-HOOK VOICE ANNOUNCE (EXECUTIVE)

A keyset associated with an add-on module (AOM) may receive an executive off-
hook voice announcement while on another call. The called keyset user may reply
handsfree without interrupting the call in progress. Only keysets with an off-hook
voice announce button (OHVA) can off-hook voice announce to keysets with AOMs.

ONE TIME DO NOT DISTURB

The Do Not Disturb (One Time) feature is used to stop all calls to a station when the
user is on an outside line and does not want to be disturbed for the duration of the
call. Upon completion of the call, DND is canceled and the station is returned to
normal service. This feature requires a programmed button.

ONE TOUCH DIALING KEYS

Frequently used speed numbers can be assigned to one touch dialing keys for fast
accurate dialing.

ON-HOOK DIALING

Any keyset user can originate calls without lifting the handset. When the called
party answers, the user may speak into the microphone or lift the handset for more
privacy.

PRIVACY RELEASE

This feature will allow another station to join in on your conversation by temporarily
releasing privacy on the C.O. line from your keyset.

Requires a Privacy Release key to be programmed on your keyset. A maximum of
three (3) other people can join in. This uses one of the conference circuits in the
system.

«
...
53
54
55
56
57
...
»

Содержание DCS 400SI




















































































Отзывы:

Нет отзывов

Похожие инструкции для DCS 400SI

Бренд: Yeastar Technology Страницы: 12

Бренд: T-Home Страницы: 52

Бренд: Olympia Страницы: 28

Phonemaster 100

Бренд: Topcom Страницы: 20

Бренд: Uniden Страницы: 88

Бренд: Uniden Страницы: 72

Бренд: Unifone Страницы: 18

Бренд: AT&T Страницы: 4

tiptel.com 822 XT

Бренд: TIPTEL Страницы: 40

EXAI 3248 Series

Бренд: Uniden Страницы: 68

Бренд: fonality Страницы: 2

Бренд: Geemarc Страницы: 94

DCS EURO SERIES 24

Бренд: Samsung Страницы: 42

Бренд: Samsung Страницы: 61

Бренд: Samsung Страницы: 132

Бренд: Samsung Страницы: 125

Бренд: Samsung Страницы: 155

Бренд: Samsung Страницы: 215

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды