background image

CONTENTS

4.2.1

STATION FEATURES

ADD-ON MODULES

PRIVACY RELEASE

APPOINTMENT REMINDER

PROGRAMMABLE KEYS

AUTOMATIC HOLD

PROGRAMMED STATION MESSAGES

AUTOMATIC PRIVACY

PROTECTION FROM BARGE-IN

BACKGROUND MUSIC

PULLOUT DIRECTORY TRAY

BUSY STATION CALLBACK

PULSE TO TONE SWITCHOVER

BUSY STATION INDICATIONS (BLF)

REDIAL

CALL FORWARDING

AUTO RETRY

CALL LOG

LAST NUMBER

CALL PICKUP

MANUAL RETRY WITH LNR

DIRECT STATION SELECTION (DSS)

MEMO REDIAL

DO NOT DISTURB 

(PROGRAMMABLE)

SAVE NUMBER

DOOR LOCK RELEASE

REMOTE HOLD

EXCLUSIVE HOLD

RING MODES

GROUP LISTENING

AUTO ANSWER

HEADSET OPERATION

RING–EIGHT TONE CHOICES

HEARING AID COMPATIBLE

VOICE ANNOUNCE

LINE QUEUING WITH CALLBACK

RINGING PREFERENCE

LINE SKIPPING

SPEAKERPHONE

LOUD RINGING INTERFACE

STATION LOCK

MANUAL SIGNALLING

TRI-COLORED LIGHTS

MESSAGE WAITING LIGHT/INDICATION

VOLUME SETTINGS

MUTE MICROPHONE/HANDSET

HANDSET

OFF-HOOK RINGING

BGM

OFF-HOOK VOICE ANNOUNCE 

(STANDARD)

RINGING

OFF-HOOK VOICE ANNOUNCE 

(EXECUTIVE)

PAGING

ONE TIME DO NOT DISTURB

SPEAKER

ONE TOUCH DIALING KEYS

OFF-HOOK RING

ON-HOOK DIALING

WALL-MOUNTABLE KEYSETS

4.2 STATION FEATURE DESCRIPTIONS

ADD-ON MODULES

32 AOM

The 32 button add-on module (AOM) adds to the capability of any keyset. The 32
programmable buttons with red buttons can be used for feature keys, DSS/BLF
keys or one touch speed dial buttons. Because this AOM has a microphone and a
speaker it can be used to provide executive off hook voice announce or as a stand
alone unit whenever a handset and dial pad are not required.

64 BUTTON MODULE

The 64 button module adds to the capability of any keyset. Up to four 64 button
modules can be added to each keyset. The 64 programmable red LED buttons with
red LED can be used for feature keys, DSS/BLF keys or one touch speed dial
buttons.  A maximum of 32 can be installed in the 400si system.

Содержание DCS 400SI




















































































Отзывы: