Samsung CXD1334 Скачать руководство пользователя

Страница: 2 / 64

Warning! Important

Safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is present inside It is
dangerous to make any kind of contact with any inside part of
this product.

This symbol alerts you that important literature concerning
operation and maintenance has been included with this product.

Note to CATV system installer:

This reminder is provided to call CATV system

installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of

Canadian Electrical Code, Part I), that provides guidelines for proper grounding

and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as practical.

Caution: FCC regulations state that any unauthorized changes or modifications to
this equipment may void the user’s authority to operate it.

Caution: To prevent electric shock, match the wide blade of plug to the wide slot,
and fully insert the plug.

Important:

One Federal Court has held that unauthorized recording of

copyrighted TV programs is an infringement of U.S copyright laws.

Certain Canadian programs may also be copyrighted and any unauthorized

recording in whole or in part may be a violation of these rights.

To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.

Содержание CXD1334

































































Результаты поиска

Содержание CXD1334

Отзывы:

Похожие инструкции для CXD1334

Бренды по названию

Популярные бренды

Samsung CXD1334, Инструкция пользователя

Результаты поиска

Содержание CXD1334

Отзывы:

Похожие инструкции для CXD1334

Бренды по названию

Популярные бренды