Samsung CXD1334, Инструкция пользователя

Страница: 18 / 64

TV O
PERATION
2
You will see the Setup
menu.
Press CH until
“Auto Program" is
highlighted.
Press VOL- or VOL +
button to begin
automatic programming.
4
When the programming
process is complete,
press
CH or CH t o
scan those channels
stared in the TV/VCR’s
memory.
The TV/VCR automatically
cycles through all the channel
numbers and places only the
available channels in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the programming process and return
to normal viewing.
Occasionally the TV/VCR will
miss an active channel if the signal is
weak or if the channel is off the air
when you start programming.
Likewise, an unavailable channel
may be included in channel memory
if there is noise or stray signals on
that channel during programming.
For information about adding and
erasing channels from memory, see
below.
Adding and Erasing Channels in Memory
You can manually add a channel to memory or erase one from memory.
To add a channel to memory or erase a channel from memory.
11
Always press 0 before a single-
digit channel number. For example,
Use the number buttons
to select channel 8, press 0 then
8.
to select the channel
you want to add to the
TV/VCR’s memory or
To add three-digit cable-TV
erase from the TV/VCR's
channels, press “+l00,” then press
memory.
the next two digits For example, to
select channel 104, press “+100,”
then press “0,” then “4”.
3.4
CHAPTER THREE TV OPERATION