background image

S

PECIAL 

F

EATURES

2

Press 

SLOW + 

or

SLOW - 

to adjust the

slow motion speed
between 1/5 and 1/60
normal speed.

Press 

PLAY 

to resume

normal play.

Video Dubbing

The tape’s sound is not played

during slow motion play.

It is normal to occasionally see some

streaks or jitter during slow motion
play.

If slow motion continues for more
than five minutes, the TV/VCR may
stop automatically to protect the tape
and the video heads.

You can make a copy of another video cassette tape. This is called “dubbing" To dub,
you need.

your 

T V / V C R

l

a separate VCR (or camcorder), and

l

two A/V cables with connectors. (You can find these at most electronics supply

stores.)

We recommend that you play the pre-recorded tape in the separate VCR (or camcorder)
and record on your TV/VCR.

Making the Connections <Option>

Attach one end of the
first cable to the VIDEO

OUT connector of the
playback VCR (or
camcorder) and the

other end to the VIDEO
IN connector of the
TV/VCR.
(For models CXE1331,

CXE1931, CXD2512 and
CXD2514, there are also
connectors on the back
of the TV/VCR.)

2

Attach one end of the
second cable to the
AUDIO OUT connector
of the VCR (or

camcorder) and the
other end to the AUDIO
IN connector of the
recording TV/VCR.
(For models CXE1331,
CXE1931,CXD2512 and
CXD2514, there are also
connectors on the back
of the TV/VCR 

).

5 . 6  

C

H A P T E R  

F

I V E :  

S

P E C I A L  

F

E A T U R E S

Содержание CXD1334

































































Отзывы: