14
ENGLISH
HOW TO OPEraTE mEmOry COOkING
After having finished memory programming, just press the NUMBER pad
of the memory number you want to select. The oven will automatically start
heating according to the pre-programmed cooking time and power level.
1.
Make sure the oven is plugged into a properly earthed electrical outlet
and “ON” appears in the display window.
2.
Open the door.
The oven lamp will be turned on.
3.
Put the food into a suitable container, place it in the centre of the oven
and then close the door securely.
result :
The oven lamp will go off.
4.
Press
NUmbEr
pad.
result :
The selected memory program
automatically starts heating. But,
NUmbEr
pad 1, 2, 3 operate after 2
seconds.
HOW TO OPEraTE DOUbLE qUaNTITy PaD
1.
Press the
Double quantity
pad.
2.
Press the desired memory
NUmbEr
pad.
result :
Cooking time which was multiplied
by the preset factor appears in the
display and cooking starts with time
digits counting down.
You don’t need to press ( ) button to start heating.
DOUbLE qUaNTITy PaD PrOGrammING
1.
Hold down ( ) and then press (
) pad. Hold
together for 2 seconds.
2.
Select desired program code by using
NUmbEr
pads.
3.
Press
NUmbEr
pads to set the magnification
factor within the range from 1.00 to 9.99.
Default factor is 1.65 preset from the manufacturer
for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each
memory code number.
4.
Press ( ) button.
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose setting
might result in excess of the maximum time allowed for each power
level, the oven does not operate exceeding the maximum time.
CM1529_XEU_04030A_EN.indd 14
2011-07-11 7:02:21
