3
ENGLISH
CONTrOL PaNEL
1.
DISPLAY
2.
PROGRAM PAD
3.
NUMBER PADS (Time, Memory
Programming)
4.
PROGRAM LOCK PAD
5.
POWER LEVEL SELECTOR PAD
6.
DEFROST SELECTOR PAD
7.
DOUBLE QUANTITY PAD
8.
+20sec PAD
(One Touch Cook Pad)
9.
CANCEL PAD
10.
START BUTTON
DISPLay
1.
PROGRAM INDICATOR
2.
TIME DISPLAY
3.
AIR FILTER CHECK TIME DISPLAY
INDICATOR
4.
MEMORY PAD NUMBER
INDICATOR
5.
POWER SOURCE CHECK
INDICATOR (When it shows,
heating does not work)
6.
POWER LEVEL INDICATORS
7.
DEFROST INDICATORS
8.
DOUBLE QUANTITY INDICATOR
9.
DATA CHECK INDICATOR
USING THIS INSTrUCTION bOOkLET
You have just purchased a SAMSUNG microwave oven. Your Owner’s
Instructions contain valuable information on cooking with your microwave oven:
• Safety precautions
• Suitable accessories and cookware
• Useful cooking tips
• Cooking tips
ImPOrTaNT SafETy INfOrmaTION
ImPOrTaNT SafETy INSTrUCTIONS.
rEaD CarEfULLy aND kEEP fOr fUTUrE rEfErENCE.
before using the oven, confirm that the following instructions are
followed.
• Use this appliance only for its intended purpose as described in this
instruction manual. Warnings and Important Safety Instructions in this
manual do not cover all possible conditions and situations that may occur.
It is your responsibility to use common sense, caution, and care when
installing, maintaining, and operating your appliance.
• Because these following operating instructions cover various models,
the characteristics of your microwave oven may differ slightly from those
described in this manual and not all warning signs may be applicable. If
you have any questions or concerns, contact your nearest service centre
or find help and information online at www.samsung.com.
• This microwave oven is supposed for heating food. It is intended for
domestic home-use only. Do not heat any type of textiles or cushions
filled with grains, which could cause burns and fire. The manufacturer
cannot be held liable for damage caused by improper or incorrect use of
the appliance.
• Failure to maintain the oven in a clean condition could lead to
deterioration of the surface that could adversely affect the life of the
appliance and possible result in a hazardous situation.
This product is a Group 2 Class B ISM equipment. The definition of group 2
which contains all ISM equipment in which radio-frequency energy is intentionally
generated and/or used in the form of electromagnetic radiation for the treatment
of material, and EDM and arc welding equipment.
For Class B equipment is equipment suitable for use in domestic establishments
and in establishments directly connected to a low voltage power supply network
which supplies buildings used for domestic purposes
1
P
1 2 3 4 5 6 7 8 9 0
+ 20sec
4
5
6
7
8
9
10
3
2
3
9
1
4
5
2
6
7 8
CM1529_XEU_04030A_EN.indd 3
2011-07-11 7:02:12
