13
ENGLISH
multi-stage
1.
Hold down
PrOGram LOCk
( ) and then press
PrOGram
( )
pad. Hold together for 2 sec.
Be sure to press the pads firmly.
result :
PrOG
indicator appears in the digital
display.
2.
Press appropriate
NUmbEr
pad for the desired memory number.
result :
Selected memory program code
appears below the
PrOGram
indicator.
3.
Select power level by pressing the
POWEr LEvEL
pad or
DEfrOST
pad.
result :
Default power level HIGH appears
in the display at first press of the
POWEr LEvEL
pad.
Press the
POWEr LEvEL
pad or
DEfrOST
pad one
or more times until you get the desired power level.
4.
Press
NUmbEr
pads to set the cooking time.
The maximum time according to each cooking
power level can be referred to in the title “Power
Levels and Time Variations” on page 7. The
NUmbEr
pads will not operate or respond when you press a cooking
time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time
allowed on the chosen
program. It is advisable to press
CaNCEL
and to
enter a new power level and cooking time.
5.
Repeat steps 3 and 4 for II or III stage memory programming.
6.
Hold down
PrOGram LOCk
( ) and then
press
PrOGram
( ) pad. Hold together for 2
sec once again.
result :
PROG indicator and memory number
indicator blink 3 times in the digital
display with a beep sound. And then the display goes
blank.
Caution:
Be sure to press the pads firmly in the right position.
7.
When you want to program more, repeat the procedures above again.
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking
is to press the
NUmbEr
pad. Then the selected memory program
automatically starts cooking.
You can not set up the same
POWEr LEvEL
or
DEfrOST
.
It operates as setting up sequence.
CM1529_XEU_04030A_EN.indd 13
2011-07-11 7:02:21
