Samsung CM1329A, Инструкция пользователя

Страница: 11 / 168

EN
11
How to Operate Memory Cooking
After having finished memory programming, just press the NUMBER
pad of the memory number you want to select. The oven will
automatically start heating according to the pre-programmed cooking
time and power level.
Double Quantity Pad Programming
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose
setting might result in excess of the maximum time allowed for each
power level, the oven does not operate exceeding the maximum time.
1. Make sure the oven is plugged into a properly earthed
electrical outlet and “ON” appears in the display window.
2. Open the door.
The oven lamp will be turned on.
3. Put the food into a suitable container, place it in the centre of
the oven and then close the door securely.
Result :
The oven lamp will go off.
4. Press NUMBER pad.
Result : The selected memory program automatically
starts heating. But,
NUMBER pad 1, 2, 3
operate after 2 seconds.
1. Hold down and then press pad. Hold together
for 2 seconds.
2. Select desired program code by using NUMBER pads.
3. Press NUMBER pads to set the magnification factor within
the range from 1.00 to 9.99.
Default factor is 1.65 preset from the
manufacturer for increasing the cooking time.
Make sure that you set a correct factor between
1.00 and 9.99 for each memory code number.
4. Press button.
jtX`Y`h†l|TWYZ[`i†luU”GGwˆŽŒGXXGGt–•‹ˆ SGqˆ•œˆ™ GY_SGYWW_GGYaW_Gwt