Installing your Microwave Oven
This microwave oven can be placed almost anywhere (kitchen
work surface or shelf, movable trolley, table).
☛
For your personal safety, this appliance must be:
◆
Properly earthed (3-pin plug)
◆
Plugged into a standard 230 Volt, 50 Hz,
AC earthed socket
1
Install the oven on a flat, level, stable surface. Make sure there is adequate
ventilation for your oven by leaving at least 10cm(four inches) of space
behind and on the sides of the oven and 20cm(eight inches) above.
(For stacking see page 17.)
2
Never block the air vents as the oven may overheat and automatically
switch itself off. It will remain inoperable until it has cooled sufficiently.
3
Remove all packing materials inside the oven.
4
Plug the cable into a 3-pin, earthed socket. If the power cable of this
appliance is damaged, it must be replaced by a special cable as supplied
from service center.
☛
Be sure to remove the protective film from outer case.
The protective film is on the outer case to prevent
scratches.
When installing or before using, be sure to remove it.
Outdoor use
This microwave oven is not designed for outdoor use.
You should use it indoors only.
During Air cooling
Do not turn power off while the fan is automatically air-cooling for
1min.
8
GB
Recommendations
DO NOT install the microwave oven in
hot or damp surroundings.
Example: Next to a traditional oven or
radiator.
The power supply specifications of the
oven must be respected and any
extension cable used must be of the
same standard as the power cable
supplied with the oven.
Wipe the interior and the door seal
with a damp cloth before using your
microwave oven for the first time.
CM1219 (GB) 4/27/00 4:09 AM Page 8
