English - 12
English - 13
03
O
V
e
N
fe
ATUR
es
control panEl
1.
DISPLAY
2.
POWER LEVEL BUTTON
3.
NUMBER BUTTONS
4.
CHECK BUTTON
5.
PROGRAMME BUTTON
6.
STOP/CANCEL BUTTON
7.
DEFROST BUTTON
8.
SOUND BUTTON
9.
DOUBLE QUANTITY BUTTON
10.
+30s BUTTON
11.
START BUTTON
oven use
chEcking that yoUr ovEn is opErating
corrEctly
The following simple procedure enables you to check that your oven is working correctly
at all times.
First, place a bowl of water on the ceramic plate. Then, close the door.
1.
Select the power level by pressing the
power level
button
once or more time.
2.
Select the cooking time by pressing the
number
buttons as
required (Max : 30 min.).
Press the
start
button.
result :
The oven heats the water for 4 or 5 minutes. The
water should then be boiling.
The oven must be plugged into an appropriate wall socket. The ceramic plate must
be in position in the oven. If a power level other than the maximum is used, the
water takes longer to boil.
auto energy saving function.
If you do not select any function when appliance is in the middle of setting or
operating with temporary stop condition, function is canceled and the display will be
turned off after 10 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
cooking/rEhEating
The following procedure explains how to cook or reheat food.
alWays
check your cooking settings before leaving the oven unattended.
First, place the food in the centre of the ceramic plate. Then, close the door.
1.
Select the power level by pressing the
power level
button
once or more time.
2.
Select the cooking time by pressing the
number
buttons as
required (Max : 30 min.).
result :
The oven light comes on.
never
switch the microwave oven on when it is empty.
Using thE start and +30s bUtton
This button offers a convenient way to heat food in 30 seconds increments at the High
power level.
1.
Press the
+30s
button once for each 30 sec. Press the
start
button.
For example, press
+30s
button twice for one minute. The
time will display, and press
start
button.
2.
Add Seconds to a program in progress by pressing the
+30s
button for each 30 sec. you want to add.
CM1089A_XEU_DE68-03310E-03_EN_160629.indd 13
2016-06-29 �� 2:56:12
