GB
4
Installation & Wiring Instructions
IMPORTANT NOTE :
The mains lead on this equipment is supplied with a mouldedplug incorporating a
fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires
replacing, a fuse approved to BS1363 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same colour as the pin
face of the plug.
Replacement covers are available from your Dealer.
If the fitted plug is not suitable for the power points in your house or the cable is
not long enough to reach a power point, you should obtain a suitable safety
approved extension lead or consult your Dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then
safely dispose of the plug.
Do not connect the plug to a mains socket, as there is a risk of shock hazard from
the bared flexible cord.
Wiring Instructions
WARNING THIS APPLIANCE MUST BE EARTHED.
This appliance must be earthed. In the event of an electrical short circuit, earthing
reduces the risk of electric shock providing an escape wire for the electric current.
The appliance is equipped with a mains lead which includes an earth wire for
connecting to the earth terminal of your mains plug.
The plug must be plugged into a socket that is properly installed and earthed.
☛
The wires in this mains lead are coloured in accordance with the
following code:
•
Green-and yellow
: Earth
•
Blue :
Neutral
•
Brown :
Live
◆
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings indentifying the terminals in your plug,
proceed as follows.
◆
Connect the green-and yellow wire to the terminal in the plug marked with the
letter E or the earth symbol (
) or coloured green or green-and-yellow.
◆
Connect the blue wire to the terminal marked with the letter N or coloured
black.
☛
Consult a qualified electrician or service technician if in doubt
about any of these instructions.
The manufacturer of this oven will not accept any liability for
damage to persons or material for non observance of these
requirements.
There are no user+serviceable parts inside the oven and if the
mains lead of this appliance is damaged, it must only be replaced
by qualified service personnel approved by the
WARNING
Ensure that the plug and power cord are not
damaged before use. If you have any reason to
remove the moulded plug from this appliance,
immediately remove the fuse and dispose of the
plug. Do not connect the plug to a mains socket
under any circumstances as there is a danger of
electric shock.
CIRCUITS
Your microwave oven should be operated on a
separate circuit from other appliances. Failure to
do this may cause the circuit breaker to trip, the
fuse to blow, or the food to cook more slowly.
