Setting up the hardware_ 38
9.
After loading paper into the tray, pinch the paper width guide and move it toward the stack of paper until it lightly
touches the side of the stack. Do not press the guide too tightly to the edge of the paper; the guide may bend the
paper.
•
Do not push the paper width guide too far causing the media to warp.
•
If you do not adjust the paper width guide, it may cause paper jams.
Do not overload the tray with paper. Otherwise, it may cause paper jams. Make sure that the paper is below the
maximum paper capacity guide inside the tray.
1
Paper capacity guide
Содержание CLX-9250ND
