Troubleshooting
_ 58
Paper Jam 2
Check Inside
Paper has jammed In
the fuser area or
around the toner
cartridge
Clear the jam. (See "In
the paper exit area" on
page 55.)
Refilled Toner
T
The toner cartridge
you have installed is
not genuine or refilled.
The arrow indicates
which color toner
cartridge.
The print quality may get
poor if the refilled toner
cartridge is installed,
since its characteristics
may significantly differ
from the genuine. We
recommend Samsung-
genuine color toner
cartridge.
Replace Toner
T
This message
appears between
Toner Empty
and
Toner Low
status.
Replace the toner
cartridge with a new one.
(See "Replacing the
toner cartridge" on
page 50.)
Replace
[xxx]
The life of the part
expires totally.
Replace the part with a
new one. Call for
service.
Replace
[xxx] Soon
The life of the part
expires soon.
See "Checking
replaceables" on
page 53 and call for
service.
Replace/Install
Toner Waste Bin
The life span of the
waste toner tank has
expired and the printer
will stop printing until
a new waste toner
tank is placed into the
machine.
Replace the waste toner
bank with a new one.
(See "Replacing the
waste toner
container" on page 52.)
Scan Unit Open
The scan unit is not
securely latched.
Close the scan unit it
locks into place.
Scanner locked
The scanner module
is locked
Turn the power switch
off and on. If the problem
persists, call for service.
Send Error
(AUTH)
There is a problem in
SMTP authentication.
Configure the
authentication setting.
Send Error
(DNS)
There is a problem in
DNS.
Configure the DNS
setting.
Send Error
(POP3)
There is a problem in
POP3.
Configure the POP3
setting.
Send Error
(SMTP)
There is a problem in
SMTP.
Change to the available
server.
Send Error
(Wrong Config)
There is a problem on
the network interface
card.
Configure your network
interface card correctly.
[Stop Pressed]
Stop/Clear
has been
pressed during an
operation.
Try again.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
Toner Empty
T
The toner cartridge
has run out. The
machine stops
printing.
Press
OK
to toggle
the message to
Stop
or
Continue
or
Black
Only
.
W
Stop
X
If the black
toner cartridge
is empty,
Black Only
message does
not appear.
You can select the
option among
Stop
,
Continue
or
Black Only
with the left/right arrow.
If you select
Stop
by
pressing
OK
on the
control panel, the
machine stops printing.
If you select
Continue
,
the machine keeps
printing, but the quality
cannot be guaranteed.
If you select
Black Only
,
the machine prints the
data in black. In this
case, the mono printing
feature is preset in the
printer properties.
When you copy, the
Black Start
button will
be activated only with
this condition.
If you do not select any,
the machine will work as
Stop
is selected.
Replace the toner
cartridge with a new one.
(See "Replacing the
toner cartridge" on
page 50.)
Toner Exhausted
T
The lifespan of the
toner cartridge which
the arrow indicates is
reached.
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
corresponding toner
cartridge with a
Samsung-genuine
cartridge. (See
"Replacing the toner
cartridge" on page 50.)
Toner Low
T
The corresponding
toner cartridge is
almost empty.
Take out the toner
cartridge and thoroughly
shake it. By doing this,
you can temporarily
reestablish printing
operations.
Transfer Belt
Error
A problem has
occurred in the
transfer belt in the
machine.
Turn the power switch
off and on. If the problem
persists, call for service.
Tray
Paper Empty
There is no paper in
the tray.
Load paper in the tray.
Tray
Paper Mismatch
The paper size
specified in the printer
properties does not
match the paper you
are loading.
Load the correct paper in
the tray.
MESSAGE
MEANING
SUGGESTED
SOLUTIONS
Содержание CLX-3170FN series
